Energidea
Dyness Dyness STACK280-115

Dyness

Series: STACK280

Dyness STACK280-115

Three-phase hybrid inverter with 108.95 kWh LFP battery

Partially verified

Best for

  • + Commercial & industrial installations
  • + Three-phase installations
  • + Projects requiring long warranty coverage
  • + LFP battery applications - verify cycle life from datasheet

Not ideal for

  • ! Typical single-family residential - consider residential product line
  • ! Single-phase installations (unless manufacturer confirms support)
  • ! Backup/battery-backup projects (no EPS functionality)

In the STACK280 series

This is the 108.95 kWh variant.

Compared to other models

  • - 167% larger capacity than Dyness STACK280-43
  • - 47% smaller capacity than Dyness STACK280-215
  • - Mid-range option balancing capacity and project flexibility.

Ideal for

Ideal for installers who need a balanced 108.95 kWh option with 81.92 kW for mainstream project sizing.

Key Specifications

Usable Capacity

108.95 kWh

Vendor
Show All Specifications

Battery

Energy (Nominal)114.69 kWhVendor
Energy (Usable)108.95 kWhVendor
Battery ChemistryLFPVendor
DC Voltage Range358.4 ~ 460.8 VVendor
C-rate-
Max Charge Power81.92 kWVendor
Max Discharge Power81.92 kWVendor
Cycle Life8000 cyclesVendor
BMS Levels3-level (Cell, Module, Cluster)Vendor
Warranty Throughput / Cycles-

Environment & Mechanical

Thermal Management-Vendor
Thermal Management DetailForced wind coolingVendor
Operating Temp Range-Vendor
Humidity Range-
Max Altitude-Vendor
Fire SuppressionAerosolVendor
DetectorsSmoke, TemperatureVendor
Pressure RelieftrueVendor
Thermal Runaway MitigationAerosol fire extinguisher suppresses fire within 5sVendor
BalancingactiveVendor
Lifting Method-
Maintenance AccessFrontVendor
Service Interval-
Noise-Vendor
IP RatingIP20Vendor
Corrosion Rating-
BMS ArchitectureCentralized cluster controlVendor
Interfaces / ProtocolsCAN, RS485Vendor
Dimensions (W x H x D)770*425*2203 mmVendor
Weight918 kgVendor

Compliance & Warranty

CertificationsUN38.3, CE-EMC, IEC62619Vendor
System Certifications-

Data Confidence & Verification

Partially verified

Data Sources

  • + Official datasheet - verified 2026-04-27
  • - Installation Manual - not available
  • - Certificate - not available

Data gaps that may affect your decision

  • ! Outdoor temperature range not specified - confirm outdoor suitability.
  • ! IP rating not documented - confirm installation location suitability.

Quick Check: Does this product fit your project?

Run a single-product scenario check using the same Product Match rules.

Full Product Match
Compare with alternatives

Compliance & Certifications

No compliance data available for this product.

Certifications

-

Documents & Downloads

DATASHEET PDF

Compatible Products - coming in Phase 3
Compare this productView SeriesStart Product MatchContact Vendor / Request Quote

Product data is sourced from manufacturers, official websites, and community contributions. Energidea does not guarantee completeness or accuracy. Installers should verify specifications, certifications, and compatibility with manufacturer documentation before quotation.

Câmpurile principale de comparație sunt incomplete (>30% lipsă). Comparația directă nu este încă recomandată.

Prompt AI pentru instalatori

Generează șabloane de prompt pregătite pentru instalatori în ChatGPT sau Gemini.

Configuratie tipica de sistem

Commercial Load Shifting

Peak shaving and self-consumption optimization for industrial sites.

Tip de retea: 3P

Potrivit pentru: Factories, warehouses, large commercial properties

Componente principale

STACK280 Cabinet, External PCS, EMS

Note

Scalable up to 12 clusters (2.58 MWh) for large-scale storage.

Declinare: For reference only. Final system configuration should be confirmed based on local regulations, grid requirements, and project conditions.

Produse similare

Dyness BF200 (314Ah)Vezi produsulDyness BF200-DCVezi produsulDyness BF100 (314Ah)Vezi produsulDyness DH100F-86Vezi produsulDyness DH100F-71Vezi produsulDyness DH100F-100Vezi produsul