Energidea
Dyness Dyness DH100F-71

Dyness

Series: DH100F

Dyness DH100F-71

Three-phase integrated bess inverter all-in-one system with 71 kWh LFP battery

Partially verified

Best for

  • + Commercial & industrial installations
  • + Three-phase installations
  • + Small commercial PV & storage (<=50 kWp)
  • + Projects requiring long warranty coverage
  • + LFP battery applications - verify cycle life from datasheet

Not ideal for

  • ! Typical single-family residential - consider residential product line
  • ! Single-phase installations (unless manufacturer confirms support)
  • ! Backup/battery-backup projects (no EPS functionality)
  • ! Projects requiring future expansion - AIO unit does not support parallel expansion

In the DH100F series

This is the 71 kWh variant.

Compared to other models

  • - 29% smaller capacity than Dyness DH100F-100
  • - Entry-level option in this series.

Ideal for

Ideal for smaller residential projects that need 71 kWh storage without oversizing the system.

Key Specifications

Rated Output Power

35 kW

Vendor

Usable Capacity

71 kWh

Vendor
Show All Specifications

Core Electrical

AC Rated Power35 kWVendor
AC Voltage400Vendor
Energy (Nominal)71 kWhVendor
Energy (Usable)71 kWhVendor
C-rate (continuous)-
Peak Power38.5 kWVendor
Battery ChemistryLFPVendor
DC Voltage Range300 ~ 1000 VVendor
System Round-trip Efficiency90 %Vendor
Noise-Vendor

EMS & Communication

EMS IncludedtrueVendor
ProtocolsEthernet, RS485, CAN, USBVendor
EMS FunctionsPeak shaving, load management, timed scheduling, PV self-generationVendor
Remote MaintenancetrueVendor
Fault DiagnosistrueVendor
Grid Support Functions DetailOn-grid/Off-grid switching, supports generator accessVendor
Data Logging Interval-
Response Time-

Environment & Mechanical

Thermal Management-Vendor
Fire SuppressionAerosolVendor
DetectorsHeat, SmokeVendor
Maintenance AccessFrontVendor
Pressure RelieftrueVendor
Thermal Runaway MitigationThree-level detection, active/passive explosion-proofVendor
Lifting PointstrueVendor
Service Interval-
IP RatingIP55Vendor
Corrosion RatingC3Vendor
Operating Temp Range-20 ~ 50Vendor
Dimensions (W x H x D)1200*1048*2258 mmVendor
Weight1650 kgVendor

Compliance & Warranty

CertificationsCE, IEC 62619, VDE 2510-50, UL1973, UL9540A, UN38.3Vendor
Battery CertificationsIEC 62619, UL 1973Vendor
System CertificationsCE, VDE 2510-50Vendor
LVRT/HVRTtrueVendor
Warranty Throughput / Cycles-

Data Confidence & Verification

Partially verified

Data Sources

  • + Official datasheet - verified 2026-04-27
  • + Installation manual - verified 2026-04-27
  • - Certificate - not available

Data gaps that may affect your decision

  • ! Outdoor temperature range not specified - confirm outdoor suitability.
  • ! IP rating not documented - confirm installation location suitability.

Quick Check: Does this product fit your project?

Run a single-product scenario check using the same Product Match rules.

Full Product Match

Compliance & Certifications

No compliance data available for this product.

Certifications

-

Documents & Downloads

DATASHEET PDF

INSTALLATION MANUAL

  • Dyness DH100F-71 Installation ManualDownload
Compatible Products - coming in Phase 3

Product data is sourced from manufacturers, official websites, and community contributions. Energidea does not guarantee completeness or accuracy. Installers should verify specifications, certifications, and compatibility with manufacturer documentation before quotation.

Prompt AI dla instalatorów

Generuj gotowe dla instalatorów szablony promptów do ChatGPT lub Gemini.

Typowa konfiguracja systemu

Peak Shaving

Commercial buildings and factories to reduce peak demand charges.

Typ sieci: 3P

Odpowiednie dla: Small to medium C&I facilities

Glowne komponenty

Dyness DH100F, PV Array (Optional), Smart Meter

Zastrzezenie: For reference only. Final system configuration should be confirmed based on local regulations, grid requirements, and project conditions.

Backup Power

Providing energy resilience for critical loads during grid failure.

Typ sieci: 3P

Odpowiednie dla: Data centers, EV charging hubs

Glowne komponenty

Dyness DH100F, Backup Generator access

Zastrzezenie: For reference only. Final system configuration should be confirmed based on local regulations, grid requirements, and project conditions.

Produkty powiązane