Energidea
Dyness Dyness STACK100 Pro-10S

Dyness

Series: STACK100 Pro

Dyness STACK100 Pro-10S

Three-phase hybrid inverter with 48.64 kWh LFP battery

Partially verified

Best for

  • + Commercial & industrial installations
  • + Three-phase installations
  • + LFP battery applications - verify cycle life from datasheet

Not ideal for

  • ! Typical single-family residential - consider residential product line
  • ! Single-phase installations (unless manufacturer confirms support)
  • ! Backup/battery-backup projects (no EPS functionality)
  • ! Long-lifecycle projects (<=1 years standard warranty)

In the STACK100 Pro series

This is the 48.64 kWh variant.

Compared to other models

  • - 100% larger capacity than Dyness STACK100 Pro-5S
  • - 33% smaller capacity than Dyness STACK100 Pro-15S
  • - Mid-range option balancing capacity and project flexibility.

Ideal for

Ideal for installers who need a balanced 48.64 kWh option with 51.2 kW for mainstream project sizing.

Key Specifications

Usable Capacity

48.64 kWh

Vendor
Show All Specifications

Battery

Energy (Nominal)51.2 kWhVendor
Energy (Usable)48.64 kWhVendor
Battery ChemistryLFPVendor
DC Voltage Range448.0 ~ 576.0 VVendor
C-rate-
Max Charge Power25.6 kWVendor
Max Discharge Power51.2 kWVendor
Cycle Life6000 cyclesVendor
BMS Levels3-level (Cell, Module, Cluster)Vendor
Warranty Throughput / Cycles-

Environment & Mechanical

Thermal Management-Vendor
Thermal Management DetailForced Air CoolingVendor
Operating Temp Range-Vendor
Humidity Range-
Max Altitude-Vendor
Fire SuppressionIntegrated AerosolVendor
DetectorsTemperature, SmokeVendor
Pressure RelieftrueVendor
Thermal Runaway MitigationYesVendor
BalancingactiveVendor
Lifting Method-
Maintenance AccessFrontVendor
Service Interval-
Noise-Vendor
IP RatingIP20Vendor
Corrosion Rating-
BMS ArchitectureIntegrated Centralized ManagementVendor
Interfaces / ProtocolsCAN, RS485Vendor
Dimensions (W x H x D)590*390*1563 mmVendor
Weight482.5 kgVendor

Compliance & Warranty

CertificationsUN38.3, CE-EMC, IEC62619, IEC62040, UKCAVendor
System Certifications-

Data Confidence & Verification

Partially verified

Data Sources

  • + Official datasheet - verified 2026-04-27
  • - Installation Manual - not available
  • - Certificate - not available

Data gaps that may affect your decision

  • ! Outdoor temperature range not specified - confirm outdoor suitability.
  • ! IP rating not documented - confirm installation location suitability.

Quick Check: Does this product fit your project?

Run a single-product scenario check using the same Product Match rules.

Full Product Match
Compare with alternatives

Compliance & Certifications

No compliance data available for this product.

Certifications

-

Documents & Downloads

DATASHEET PDF

  • Dyness STACK100 Pro-10S DatasheetDownload
Compatible Products - coming in Phase 3
Compare this productView SeriesStart Product MatchContact Vendor / Request Quote

Product data is sourced from manufacturers, official websites, and community contributions. Energidea does not guarantee completeness or accuracy. Installers should verify specifications, certifications, and compatibility with manufacturer documentation before quotation.

Câmpurile principale de comparație sunt incomplete (>30% lipsă). Comparația directă nu este încă recomandată.

Prompt AI pentru instalatori

Generează șabloane de prompt pregătite pentru instalatori în ChatGPT sau Gemini.

Configuratie tipica de sistem

Grid-connected Commercial

Peak shaving and self-consumption for factories.

Tip de retea: 3P

Potrivit pentru: Small to medium C&I sites

Componente principale

STACK100 Pro Modules, BDU, PCS

Note

Expandable up to 12 clusters.

Declinare: For reference only. Final system configuration should be confirmed based on local regulations, grid requirements, and project conditions.

Produse similare

Dyness BF200 (314Ah)Vezi produsulDyness BF200-DCVezi produsulDyness BF100 (314Ah)Vezi produsulDyness DH100F-86Vezi produsulDyness DH100F-71Vezi produsulDyness DH100F-100Vezi produsul