Dyness
Three-phase hybrid inverter with 180.86 kWh LFP battery
Chemistry
LFP
VendorUsable Capacity
180.86 kWh
VendorWarranty
10 years
Vendor| Energy (Nominal) | 200.96 kWhVendor |
| Energy (Usable) | 180.86 kWhVendor |
| Battery Chemistry | LFPVendor |
| DC Voltage Range | 560 ~ 730 VVendor |
| C-rate | - |
| Max Charge Power | 100.48 kWVendor |
| Max Discharge Power | 100.48 kWVendor |
| Cycle Life | 6000 cyclesVendor |
| BMS Levels | 3-level integrated managementVendor |
| Warranty Throughput / Cycles | - |
| Thermal Management | LiquidVendor |
| Thermal Management Detail | Liquid cooling for battery clusters with temperature uniformity control.Vendor |
| Operating Temp Range | -Vendor |
| Humidity Range | - |
| Max Altitude | -Vendor |
| Fire Suppression | AerosolVendor |
| Detectors | Heat, Smoke, GasVendor |
| Pressure Relief | trueVendor |
| Thermal Runaway Mitigation | Active liquid cooling and integrated fire suppression system.Vendor |
| Balancing | activeVendor |
| Lifting Method | - |
| Maintenance Access | FrontVendor |
| Service Interval | - |
| Noise | 75 dB(A)Vendor |
| IP Rating | IP55Vendor |
| Corrosion Rating | - |
| BMS Architecture | Centralized management with RS485/CAN communication.Vendor |
| Interfaces / Protocols | CAN, RS485, EthernetVendor |
| Dimensions (W x H x D) | 1300*1300*2280 mmVendor |
| Weight | 2650 kgVendor |
| Certifications | CE, UN38.3, IEC 62619Vendor |
| System Certifications | - |
Run a single-product scenario check using the same Product Match rules.
No compliance data available for this product.
-
Product data is sourced from manufacturers, official websites, and community contributions. Energidea does not guarantee completeness or accuracy. Installers should verify specifications, certifications, and compatibility with manufacturer documentation before quotation.
Generate installer-ready prompt templates for ChatGPT or Gemini.
Grid Type: 3P
Suitable For: Commercial and Industrial parks
Main Components
BF200 (314Ah) Cabinets, Central PCS, EMS
