Energidea
Dyness Dyness PowerBrick 5.0SC

Dyness

Series: PowerBrick SC

Dyness PowerBrick 5.0SC

Single-phase off grid inverter with 4.8 kWh LFP battery

Partially verified

Best for

  • + Residential installations
  • + Single-phase residential installations
  • + Projects requiring long warranty coverage
  • + LFP battery applications - verify cycle life from datasheet

Not ideal for

  • ! Large-scale C&I projects - consider commercial product line
  • ! Three-phase commercial/industrial installations
  • ! Backup/battery-backup projects (no EPS functionality)

In the PowerBrick SC series

This is the 4.8 kWh variant.

Compared to other models

  • - 50% smaller capacity than Dyness PowerBrick 10.0SC
  • - Entry-level option in this series.

Ideal for

Ideal for smaller residential projects that need 4.8 kWh storage without oversizing the system.

Key Specifications

Usable Capacity

4.8 kWh

Vendor
Show All Specifications

Battery

Battery ChemistryLFPVendor
Battery Voltage ClassLVVendor
Capacity (Nominal)5.12 kWhVendor
Capacity (Usable)4.8 kWhVendor
Nominal Voltage51.2 VVendor
Voltage Range44.8-57.6 VVendor
Min Modules1Vendor
Max Modules32Vendor
Installation Type-Vendor
Capacity Scalability Min5.12 kWhVendor
Capacity Scalability Max163.84 kWhVendor
Max Charge Power5.12 kWVendor
Max Discharge Power5.12 kWVendor
Peak Discharge Power10.24 kWVendor
Cycle Life6000 cyclesVendor
DoD94 %Vendor
Round-trip Efficiency95 %Vendor

Environment & Mechanical

IP RatingIP65Vendor
Charge Temp Range0 to 55Vendor
Discharge Temp Range-20 to 55Vendor
Heating Supported-
Dimensions (W x H x D)440*565*160 mmVendor
Weight45 kgVendor

EMS & Communication

BMS InterfacesCAN/RS485Vendor
Compatible InvertersSMA/Victron/Ingeat/Goodwe/Solis/Deye/Growatt/SAJ/Luxpower/Megarevo/Trovic/Voltronic/SunsynkVendor
BMS Update SupportedtrueVendor

Compliance & Warranty

CertificationsCE/UN38.3/IEC62619/IEC62040/UKCAVendor
Shipping CertificationsUN38.3Vendor

Data Confidence & Verification

Partially verified

Data Sources

  • + Official datasheet - verified 2026-04-27
  • - Installation Manual - not available
  • - Certificate - not available

Data gaps that may affect your decision

  • ! Outdoor temperature range not specified - confirm outdoor suitability.
  • ! IP rating not documented - confirm installation location suitability.

Quick Check: Does this product fit your project?

Run a single-product scenario check using the same Product Match rules.

Full Product Match
Compare with alternatives

Compliance & Certifications

No compliance data available for this product.

Certifications

-

Documents & Downloads

DATASHEET PDF

  • Dyness PowerBrick 5.0SC DatasheetDownload
Compatible Products - coming in Phase 3
Compare this productView SeriesStart Product MatchContact Vendor / Request Quote

Product data is sourced from manufacturers, official websites, and community contributions. Energidea does not guarantee completeness or accuracy. Installers should verify specifications, certifications, and compatibility with manufacturer documentation before quotation.

Kluczowe pola porównania są niekompletne (>30% braków). Bezpośrednie porównanie nie jest jeszcze zalecane.

Prompt AI dla instalatorów

Generuj gotowe dla instalatorów szablony promptów do ChatGPT lub Gemini.

Typowa konfiguracja systemu

Standard Single Module

Small residential storage

Typ sieci: Off-grid/Hybrid

Odpowiednie dla: Households with low daily energy consumption

Glowne komponenty

1x PowerBrick 5.0SC, 1x Hybrid Inverter

Zastrzezenie: For reference only. Final system configuration should be confirmed based on local regulations, grid requirements, and project conditions.

Produkty powiązane

Dyness BF200 (314Ah)Zobacz produktDyness BF200-DCZobacz produktDyness BF100 (314Ah)Zobacz produktDyness DH100F-86Zobacz produktDyness DH100F-71Zobacz produktDyness DH100F-100Zobacz produkt