Industrial Peak Shaving
Reducing demand charges for factories with irregular high-load profiles.Grid Type: 3-Phase TN/TT
Suitable For: Manufacturing plants and commercial complexes.
Main Components
MC-I Cabinet, External C&I Inverter, Local EMS.

BYD
Three-phase hybrid inverter with 131.07 kWh LFP battery
Chemistry
LFP
VendorUsable Capacity
131.07 kWh
VendorWarranty
10 years
Vendor| Energy (Nominal) | 131.07 kWhVendor |
| Energy (Usable) | 131.07 kWhVendor |
| Battery Chemistry | -Vendor |
| DC Voltage Range | 672 - 864 VVendor |
| C-rate | 1 CVendor |
| Max Charge Power | 65.5 kWVendor |
| Max Discharge Power | 131 kWVendor |
| Cycle Life | -Vendor |
| BMS Levels | 3Vendor |
| Warranty Throughput / Cycles | - |
| Thermal Management | -Vendor |
| Thermal Management Detail | Internal liquid cooling circulation with integrated chiller.Vendor |
| Operating Temp Range | -Vendor |
| Humidity Range | - |
| Max Altitude | -Vendor |
| Fire Suppression | AerosolVendor |
| Detectors | Smoke, Heat, Gas (CO/H2)Vendor |
| Pressure Relief | trueVendor |
| Thermal Runaway Mitigation | Cell-to-pack Blade technology with directional venting.Vendor |
| Balancing | - |
| Lifting Method | Forklift or Crane (top lifting)Vendor |
| Maintenance Access | Front and Side accessVendor |
| Service Interval | AnnualVendor |
| Noise | -Vendor |
| IP Rating | IP55Vendor |
| Corrosion Rating | - |
| BMS Architecture | Centralized EMS with multi-tier BMS (BMU/BCU/BSU).Vendor |
| Interfaces / Protocols | CAN, RS485, EthernetVendor |
| Dimensions (W x H x D) | 1300 x 1300 x 2280 mmVendor |
| Weight | 1550 kgVendor |
| Certifications | IEC 62619, IEC 62477-1, UN 38.3Vendor |
| System Certifications | CE, VDE 2510-50Vendor |
Run a single-product scenario check using the same Product Match rules.
No compliance data available for this product.
-
Product data is sourced from manufacturers, official websites, and community contributions. Energidea does not guarantee completeness or accuracy. Installers should verify specifications, certifications, and compatibility with manufacturer documentation before quotation.
Generate installer-ready prompt templates for ChatGPT or Gemini.
Grid Type: 3-Phase TN/TT
Suitable For: Manufacturing plants and commercial complexes.
Main Components
MC-I Cabinet, External C&I Inverter, Local EMS.
Grid Type: On-grid
Suitable For: Large solar-equipped rooftops and EV charging hubs.
Main Components
Solar Array, MC-I Storage, Hybrid C&I Inverter.