Energidea
Dyness Dyness DH200F

Dyness

Series: DH200F

Dyness DH200F

Three-phase integrated bess inverter all-in-one system with 193.5 kWh LFP battery

Partially verified

Best for

  • + Commercial & industrial installations
  • + Three-phase installations
  • + Medium commercial & industrial (50-200 kWp)
  • + Cost-sensitive projects accepting standard warranty
  • + LFP battery applications - verify cycle life from datasheet

Not ideal for

  • ! Typical single-family residential - consider residential product line
  • ! Single-phase installations (unless manufacturer confirms support)
  • ! Backup/battery-backup projects (no EPS functionality)
  • ! Projects requiring future expansion - AIO unit does not support parallel expansion

Key Specifications

Type

INTEGRATED_BESS

Phase

THREE_PHASE

Rated Output Power

100 kW

Vendor

Chemistry

LFP

Vendor

Usable Capacity

193.5 kWh

Vendor

Warranty

5 years

Vendor
Show All Specifications

Core Electrical

AC Rated Power100 kWVendor
AC Voltage400Vendor
Energy (Nominal)215 kWhVendor
Energy (Usable)193.5 kWhVendor
C-rate (continuous)-
Peak Power110 kWVendor
Battery ChemistryLFPVendor
DC Voltage Range672 ~ 864 VVendor
System Round-trip Efficiency90 %Vendor
Noise75 dB(A)Vendor

EMS & Communication

EMS IncludedtrueVendor
ProtocolsEthernet, 4G, RS485, CAN, Modbus TCPVendor
EMS FunctionsPeak-shaving, load shifting, PV self-consumption, demand responseVendor
Remote MaintenancetrueVendor
Fault DiagnosistrueVendor
Grid Support Functions DetailVoltage and frequency regulation supportVendor
Data Logging Interval-
Response Time20 msVendor

Environment & Mechanical

Thermal Management-Vendor
Fire SuppressionAerosolVendor
DetectorsSmoke, Heat, CO2Vendor
Maintenance AccessFrontVendor
Pressure RelieftrueVendor
Thermal Runaway MitigationMulti-level fire detection and combined extinguishing agentsVendor
Lifting PointstrueVendor
Service IntervalAnnualVendor
IP RatingIP55Vendor
Corrosion RatingC3Vendor
Operating Temp Range-20 ~ 50Vendor
Dimensions (W x H x D)1850*1265*2250 mmVendor
Weight3300 kgVendor

Compliance & Warranty

CertificationsCE, TUV, IEC62619, IEC63056, IEC60730, EN62477, UKCAVendor
Battery CertificationsIEC62619, UN38.3Vendor
System CertificationsEN62477, IEC62933Vendor
LVRT/HVRTtrueVendor
Warranty Throughput / Cycles-

Data Confidence & Verification

Partially verified

Data Sources

  • + Official datasheet - verified 2026-04-27
  • - Installation Manual - not available
  • - Certificate - not available

Data gaps that may affect your decision

  • ! Outdoor temperature range not specified - confirm outdoor suitability.
  • ! IP rating not documented - confirm installation location suitability.

Quick Check: Does this product fit your project?

Run a single-product scenario check using the same Product Match rules.

Full Product Match

Compliance & Certifications

No compliance data available for this product.

Certifications

-

Documents & Downloads

DATASHEET PDF

Compatible Products - coming in Phase 3

Product data is sourced from manufacturers, official websites, and community contributions. Energidea does not guarantee completeness or accuracy. Installers should verify specifications, certifications, and compatibility with manufacturer documentation before quotation.

Prompt AI pentru instalatori

Generează șabloane de prompt pregătite pentru instalatori în ChatGPT sau Gemini.

Configuratie tipica de sistem

Commercial Peak Shaving

Industrial facility with high energy tariffs during peak hours.

Tip de retea: 3P

Potrivit pentru: Factories, warehouses, large commercial buildings

Componente principale

DH200F Cabinet, External Meter, Cloud EMS

Declinare: For reference only. Final system configuration should be confirmed based on local regulations, grid requirements, and project conditions.

PV Integrated Commercial BESS

Maximizing solar self-consumption in a commercial setting.

Tip de retea: 3P

Potrivit pentru: Commercial solar-plus-storage projects

Componente principale

DH200F (MPPT version), PV Array, Local Load

Declinare: For reference only. Final system configuration should be confirmed based on local regulations, grid requirements, and project conditions.

Produse similare