Energidea
Dyness Dyness STACK100 Pro-5S

Dyness

Series: STACK100 Pro

Dyness STACK100 Pro-5S

Three-phase hybrid inverter with 24.32 kWh LFP battery

Partially verified

Best for

  • + Commercial & industrial installations
  • + Three-phase installations
  • + LFP battery applications - verify cycle life from datasheet

Not ideal for

  • ! Typical single-family residential - consider residential product line
  • ! Single-phase installations (unless manufacturer confirms support)
  • ! Backup/battery-backup projects (no EPS functionality)
  • ! Long-lifecycle projects (<=1 years standard warranty)

In the STACK100 Pro series

This is the 24.32 kWh variant.

Compared to other models

  • - 67% smaller capacity than Dyness STACK100 Pro-15S
  • - Entry-level option in this series.

Ideal for

Ideal for smaller residential projects that need 24.32 kWh storage without oversizing the system.

Key Specifications

Usable Capacity

24.32 kWh

Vendor
Show All Specifications

Battery

Energy (Nominal)25.6 kWhVendor
Energy (Usable)24.32 kWhVendor
Battery ChemistryLFPVendor
DC Voltage Range224.0 ~ 288.0 VVendor
C-rate-
Max Charge Power12.8 kWVendor
Max Discharge Power25.6 kWVendor
Cycle Life6000 cyclesVendor
BMS Levels3-level (Cell, Module, Cluster)Vendor
Warranty Throughput / Cycles-

Environment & Mechanical

Thermal Management-Vendor
Thermal Management DetailForced Air CoolingVendor
Operating Temp Range-Vendor
Humidity Range-
Max Altitude-Vendor
Fire SuppressionIntegrated AerosolVendor
DetectorsTemperature, SmokeVendor
Pressure RelieftrueVendor
Thermal Runaway MitigationYesVendor
BalancingactiveVendor
Lifting Method-
Maintenance AccessFrontVendor
Service Interval-
Noise-Vendor
IP RatingIP20Vendor
Corrosion Rating-
BMS ArchitectureIntegrated Centralized ManagementVendor
Interfaces / ProtocolsCAN, RS485Vendor
Dimensions (W x H x D)590*390*898 mmVendor
Weight247.5 kgVendor

Compliance & Warranty

CertificationsUN38.3, CE-EMC, IEC62619, IEC62040, UKCAVendor
System Certifications-

Data Confidence & Verification

Partially verified

Data Sources

  • + Official datasheet - verified 2026-04-27
  • - Installation Manual - not available
  • - Certificate - not available

Data gaps that may affect your decision

  • ! Outdoor temperature range not specified - confirm outdoor suitability.
  • ! IP rating not documented - confirm installation location suitability.

Quick Check: Does this product fit your project?

Run a single-product scenario check using the same Product Match rules.

Full Product Match
Compare with alternatives

Compliance & Certifications

No compliance data available for this product.

Certifications

-

Documents & Downloads

DATASHEET PDF

  • Dyness STACK100 Pro-5S DatasheetDownload
Compatible Products - coming in Phase 3
Compare this productView SeriesStart Product MatchContact Vendor / Request Quote

Product data is sourced from manufacturers, official websites, and community contributions. Energidea does not guarantee completeness or accuracy. Installers should verify specifications, certifications, and compatibility with manufacturer documentation before quotation.

Les champs clés de comparaison sont incomplets (>30% manquants). La comparaison directe n'est pas encore recommandée.

Prompt AI installateur

Générez des modèles de prompt prêts pour installateurs sur ChatGPT ou Gemini.

Configuration systeme type

Grid-connected Commercial

Peak shaving and self-consumption for factories.

Type de reseau: 3P

Adapte a: Small to medium C&I sites

Composants principaux

STACK100 Pro Modules, BDU, PCS

Notes

Expandable up to 12 clusters.

Avertissement: For reference only. Final system configuration should be confirmed based on local regulations, grid requirements, and project conditions.

Produits liés

Dyness BF200 (314Ah)Voir le produitDyness BF200-DCVoir le produitDyness BF100 (314Ah)Voir le produitDyness DH100F-86Voir le produitDyness DH100F-71Voir le produitDyness DH100F-100Voir le produit